|
|
RFP 24-1, RFP 24-2, RFP 24-3 Filler Panels 
RFP 24-1 1/4 filler panel for RA 24
- (inches) 5-7/32H x 4-5/32W
- (mm) 132.6H x 105.6W
RFP 24-2 1/2 filler panel for RA 24
- (inches) 5-7/32H x 8-11/32W
- (mm) 132.6H x 211.9W
RFP 24-3 3/4 filler panel for RA 24
- (inches) 5-7/32H x 12-17/32W
- (mm) 132.6H x 318.3W
RFP 37-1, RFP 37-2, RFP 37-3 Filler Panels
RFP 37-1 1/4 filler panel for RA 37
- (inches) 5-7/32H x 4-5/32W
- (mm) 132.6H x 105.6W
RFP 37-2 1/2 filler panel for RA 37 and SNR 488-4
- (inches) 5-7/32H x 8-11/32W
- (mm) 132.6H x 211.9W
RFP 37-3 3/4 filler panel for RA 37
- (inches) 5-7/32H x 12-17/32W
- (mm) 132.6H x 318.3W
RFP 22-1, RFP 22-2, RFP 22-3 Filler Panels 
The
following
models are supplied without slide assembly and handle, may be used to fill unused slots in
RA 22-6A, RA 32,
CA 4
and CA 5.
Model RFP 22-1
- (inches) 5-7/32H x 2-25/32W
- (mm) 132.6H x 70.6W
- Ship. Wgt.: 1/2 lb. (0.2kg)
Model RFP 22-2
- (inches) 5-7/32H x 5-9/16W
- (mm) 132.6H x 141.2W
- Ship. Wgt.: 1/2 lb. (0.2kg)
Model RFP 22-3
- (inches) 5-7/32H x 8-3/8W
- (mm) 132.6H x 212.7W:
- Ship. Wgt.: 1/2 lb. (0.2kg)
FILLER SUPPORT BRACKETS
The filler support brackets should be used whenever the total load in a rack exceeds 75 lbs. Mount directly beneath the
lower front edge of the housing and fasten to the rack edge. Use of these brackets also provides additional cooling space
between power supplies.
FSB-1 Filler support bracket
- (inches) 1-23/32H x 19W
- (mm) 43.6H x 482.6W
FSB-3 Filler support bracket
- (inches) 3-15/32H x 2-25/32W
- (mm) 88.1H x 70.6W
FSB-5 Filler support bracket
- (inches) 5-7/32H x 19W
- (mm) 132.6H x 482.6W
|
