KEPCO LOGO - TO HOME PAGE

    HELP
Kepco Power Supplies
POWER
ASSEMBLY
OVERVIEW

PREVIOUS NEXT
FRONT
PANEL
COMPONENTS
REAR
PANEL
COMPONENTS
FILLER
PANELS
RACK
ADAPTERS
ACCESSORIES
POWER
ASSEMBLY
QUOTE
MODIFICATION
REQUEST
To purchase any of the rack adapters or cases listed here, click

RA 39: 3-1/2"H x 19"W x 15" D
RA 40: 5-1/4"H x 19"W x 15" D
RA 42: 5-1/4"H x 19"W x 21" D
RA 43*: 7"H x 19"W x 21" D
RA 44: 5-1/4"H x 19"W x 16" D
RA 45*: 7"H x 19"W x 16" D
RA 46: 5-1/4"H x 19"W x 24" D
RA 47*: 8-3/4"H x 19"W x 24" D
RA 48: 5-1/4"H x 19"W x 15" D
RA 73: 3-1/2"H x 24"W x 16"D
RA 74: 5-1/4"H x 24"W x 16"D
RA 75: 1-3/4"H x 19"W x 16"D
RA 76: 3-1/2"H x 19"W x 16"D
RA 77: 8-3/4"H x 19"W x 21" D

*Supplied with various vented and solid front and rear filler panels.

The RA 39 (illustration) and RA 40 (illustration) rack mount systems are designed to allow you to combine a variety of switching power modules in a standard 19" equipment housing. These two rack adapters are similar. Both are open frame; the RA 39 is 3-1/2 inches high, while the RA 40 is 5-1/4 inches high. RAB 39-40 brackets are available to mount older Kepco power supplies (RMK, RMX, RMD, RMT, RXT, RDT, MP and CMP) to the rack adapter.

Special brackets are available specifically to accomodate the mounting of the Kepco power supplies listed below:

Illustrations are available showing various configurations filling the RA 40 rack adapter
Mounting Brackets for RA 39 and RA 40
POWER SUPPLY
MODEL NUMBER
MOUNTING BRACKET
MODEL NUMBER
USED FOR MOUNTING
ERD
 RAB 39-40ERD ERD 30W, 60W, and 150W in RA 39 or RA 40 (See Figs 1, 7, 8, 10, 12, 13) 18), 19), 20), or 22)
ERX
 RAB 39-40X ERX 30W, 60W, and 120W in RA 39 or RA 40 (See Figs 2, 3, 4, 5, 6), 11, or 21)
FAW
 RAB 39-40FAW FAW 50W, 100W and 150W models in RA 39 or RA 40 (See Figs 1, 7, or 13)
FCP
 RAB 39-40FMP FCP 3W, and 10W models in RA 39 or RA 40 (See Figs 2, 3, 4,or 5)
FMP
 RAB 39-40FMP FMP 3W, and 10W models in RA 39 or RA 40 (See Figs 2, 3, 4,or 5)
KRW
 RAB 39-40MRW KRW 350KV, KRW 351KV and KRW 352KV (see NOTE 1), models in RA 39 or RA 40 (See Figs 2,or 5)
MRW
 RAB 39-40MRW MRW 150/151KV (see (see NOTE 2), KRW 160/161KV (see (see NOTE 3) and KRW 170/171KV (see NOTE 3), models in RA 39 or RA 40 (See Figs 2, 3, 4, 5), or 20)
RAX
 RAB 39-40RAX RAX 50W, 100W, 175W, 300W models in RA 39 or RA 40
RAB 40-RCW1500 RAX 1500W models in RA 40
RCW
 RAB 39-40RCW RCW 350W and 750W models in RA 39 or RA 40 (See Figs 8, 9, 12, 13), 18), or 19)
RAB 40-RCW1500 RCW 1500W models in RA 40 (includes 2 brackets) (See Fig. 14)
RKE
 RAB 40-RKE RKE 1500W models in RA 40
RKW
 RAB 39-40RKW6 RKW 30, 50, 100, 150, 600W models in RA 40 (See Fig. 15), 18), 19), 20), or 22)
RKW 30, 50, 100, 150W models in RA 39 (See Fig. 23), 24),
RAB 39-40RKW3 RKW 300W models in RA 40 (See Fig. 17, 21), or 22)
RAB 40-RKW1500 RKW 1500W models in RA 40 (includes 2 brackets) (See Fig. 16)
RTW
 RAB 39-40RTW RTW 50W, 100W, 150W, 300W models in RA 40
NOTE 1. Series KRW requires case CA 29 (supplied separately) for mounting in RA 39 or RA 40 rack adapters.
NOTE 2. Series MRW 150/151KV requires case CA 19 (supplied separately) for mounting in RA 39 or RA 40 rack adapters.
NOTE 3. Series MRW 160/161KV and MRW 170/171KV require case CA 20 (supplied separately) for mounting in RA 39 or RA 40 rack adapters.

RA 39 Rack adapter system for installation of:
ERD, ERX, FAW, FCP, FMP, KRW, MRW, RAX, RCW, RBW and RKW (30W, 50W, 100W, 150W)

RA 39 drawing

RA 40 Rack adapter system for installation of:
ERD, ERX, FAW, FCP, FMP, KRW, MRW, RAX, RCW, RBW and RKW

RA 40 drawing

RA 42-48 drawing

Rack Adapters RA 73, RA 74, RA 75 and RA 76 are designed to accomodate Kepco's low profile power supplies:

RA 75 Rack Adapter

RA 76 Rack Adapter

PREVIOUS TOP NEXT
Products • Support • Literature • Contact Us • Careers • About

KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 • FAX (718) 767-1102
www.kepcopower.com • email: hq@kepcopower.com

©Copyright 2008, Kepco Inc. All rights reserved