KEPCO LOGO - TO HOME PAGE

    HELP
Kepco Power Supplies
DIN RAIL MOUNTABLE PRODUCTS
PREVIOUS NEXT
SINGLE OUTPUT
AC TO DC
MULTI-OUTPUT
AC TO DC
SINGLE OUTPUT
DC TO DC
PROGRAMMABLE
 Table 1 lists the minimum clearance required to install specific Kepco power supplies on the DIN rail when the short (S) option is chosen. Figure 4 illustrates the clearance requirements. Table 1 has been generated using the following formula:

D = B x sin20° where B = (L/2)-3 and L is measured in inches

TABLE 1 - DIN RAIL CLEARANCE REQUIREMENTS
MODEL
L
(length in inches)
(See Figure 4)
B
[(L/2)-3]
D
(Clearance in inches)
(See Figure 4)
DIN ERD 60W-DS
7.3
0.65
0.22
DIN ERD 150W-DS
9.7
1.85
0.63
DIN ERX 60W-DS
7.1
0.55
0.19
DIN ERX 120W-DS
9
1.5
0.51
DIN ERX 240W-DS
13
3.5
1.20
DIN FAW 50W-DS
6.5
0.25
0.09
DIN FAW 100W-DS
7.9
0.95
0.32
DIN FAW 150W-DS
7.9
0.95
0.32
DIN RAX 50W-DS
7.5
0.75
0.26
DIN RAX 100W-DS
7.9
0.95
0.32
DIN RAX 175W-DS
8.7
1.35
0.46
DIN RAX 300W-DS
8.66
1.33
0.45
DIN RKW 300W-DS
6.89
0.45
0.15
DIN RKW 600W-DS
7.87
0.94
0.32
DIN RKW 1500W-DS
11.81
2.91
0.99
DIN RTW 100W-DS
6.3
0.15
0.05
DIN RTW 150W-DS
7.09
0.95
0.32
DIN RTW 300W-DS
9.84
1.92
0.66

FIGURE 4 - CLEARANCE REQUIRED TO INSTALL POWER SUPPLY ON DIN RAIL

Mounting Clearances for DIN -DS (short) option
PREVIOUS TOP NEXT
Products • Support • Literature • Contact Us • Careers • About

KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 • FAX (718) 767-1102
www.kepcopower.com • email: hq@kepcopower.com

©Copyright 2012, Kepco Inc. All rights reserved