If Kepco's website has been helpful in finding the answer to your power systems needs, our pages offer you a way of getting rapid implementation without leaving your browser (no walking to the fax! no requisitions! no paperwork!). If you are looking for a quick response, you can have your solution on its way quickly, usually within 24 hours. Kepco products available for on-line purchase are listed below. After checking out the model specifications, click on BUY NOW to place your order.

EL DC Electronic Loads for testing power sources: batteries, power supplies, generators, chargers, fuel cells, etc., 1KW to 5KW Modules, 19 in. x 1U	KLP Full 1200W output from 0 - 10V to 0 - 600V; GPIB. RS 232, external analog programmable; Precision, Digital, V/C stabilizer, Input 88-265V a-c, 19 in. x 1U. RODC circuit (Option R) rapidly discharges output capacitance, significantly reducing response time to reductions in output voltage.	BOP-MG 1KW 1000W, Bipolar, 4-quadrant,source-sink, energy recuperation,analog/digital control, Programmable V/C Stabilizers
BOP-GL 1KW 1000W, Bipolar, Optimized for inductive loads, 4-quadrant, source-sink, energy recuperation, analog/digital control, Programmable V/C Stabilizers	HSF 50, 100, 150, 300W, 600W, 1200W, 1500W, 1 output, switcher hot swap, N+1 Wide range input: 95-264V a-c/125-370V d-c, 3.3/ 5/ 12/ 15/ 24/ 28/ 48V output	HSF-1UR 50, 100W, 1U Profile, 1 output, switcher, hot swap, N+1 Wide range input: 95-264V a-c/125-370V d-c, 5/ 12/ 15/ 24/ 28/ 48V output
ATE-DMG 1000W, Precision, Digital, Linear, GPIB Programmable V/C Stabilizers	BHK-MG 200W, 40W, HV (300/ 500/ 1000/ 2000V), Linear, GPIB Programmable, V/C Stabilizers	ABC 100W Precision, GPIB Programmable, Digital, V/C stabilizer, 0 to 10/ 15/ 25/ 36/ 60/ 125V output
ATE 50, 100. 250, 500, 1000W, Precision, Linear, Programmable, V/C Stabilizer, output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V d-c	BOP 100, 200, 400W, GPIB or RS232 Programmable, V/C Stabilizers, Linear, bipolar. Option L optimized for inductive loads, Option C for capacitive loads.	BOP-HV 40W, 500V, 1000V, Bipolar, Linear, Programmable V/C Stabilizers
HSP 1000, 1500W, 1 output, switcher, hot swap N+1 redundancy, PFC, Input: Wide range a-c/d-c Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V	JQE 100, 250, 500, 1000W, Linear, Programmable V stabilizer, Analog programmable, Input: 115/230V a-c, Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V	MAT 360, 720, 1080W, Programmable V/C stabilizers, IEEE 1118 Bus, Optional GPIB Adapter, Input: 115/230V a-c, Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V d-c Built to order only!
MPS 70W, Low noise voltage stabilizer, 3 outputs, Overvoltage Crowbar, adjustable Current Limit, Bench, Input: 115/230V a-c, Output: 0 to 6V (with OVP)/0 to 5A, 0 to ±20V/0 to 1A	MSK 100W, linear, bench-top, 1 output, Input: 115/230V a-c, Output: 0 to 10/ 20/ 40/ 60/ 126V d-c Built to order only!	MST 200, 400W, Programmable, Switcher. PFC, V/C stabilizer, IEEE 1118/GPIB Bus, Input: 100-240V a-c/ 24/ 28/ 48V d-c, Output: 0 to 6/ 15/ 25/ 40/ 55/ 65/ 75/ 100/ 150V d-c
PAT 20Watt, Linear, Programmable, V/C stabilizers, input: 115/230V a-c, Output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c	PRM 60, 120, 180, 280, 300, 450W, Fixed output, ferroresonant, V Stabilizer Input: 115V a-c, Output: 0-5/ 8/ 8.5/ 12/ 15/ 21/ 24/ 26/ 28/ 36/ 48/ 120/ 240V, Dual Output: 0 to ±12/ ±15/ ±24/ ±60V	PRR 1000W, Fixed output, Ferroresonant, Rack Mount, Voltage Stabilizers, Input: 120V a-c, Output: 12/ 24/ 28/ 48V d-c
PTR 50W, Linear, Programmable, V/C stabilizers, Separate V/C stabilization channels, Input: 115/230V a-c, Output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c	TBC 300, 600, 1500, 3000W, Battery charger, Built in Float-Equalize selector with timer, rack/wall-mount Input: 115/230V a-c (1500/3000W: 230V a-c only) Output 12, 24, 48V d-c	CC 20W, Linear, Programmable, fast-recovery, C Stabilizers, Input: 115/230V a-c, Output: 0-7/ 15/ 21/ 40/ 72/ 100V d-c Built to order only!
MBT 360W, Linear programmable V/C stabilizers, keypad, LCD, IEEE 1118 (serial) bus, GPIB and RS 232 optional, Input: 115/230V a-c, Output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V d-c. Built to order only!	PCX-MAT 20W, Linear, Programmable, high speed V Stabilizer, Bench/Rack Mount, Input: 115/230V a-c. Output: 0-7/ 15/ 21/ 40/ 72/ 100/ 200V d-c Built to order only!

INSTRUMENTS

MODULAR

PLUGGABLE/ HOT SWAPPABLE

PROGRAMMERS/CONTROLLERS/ INTERFACES

ACCESSORIES

SERVICE MANUALS

SNP-C03, -C04, -C06, -C08, -C10 and -C15 Fully enclosed; Single And Multiple outputs; 30, 40, 60, 80, 100, 150W, peak power capability to 220W; Power-on LED; ITE Safety Recognition; RoHS compliant; CE Mark; Cost Effective	SNP-G04, -GK6, -G12 Single Output, 12 to 48V, 60V in SNP-GK6; 40, 60, 120W rated power, peak power to 200W; PC Card Construction; Small footprint; Medical Grade and ITE versions; Green Power, RoHS compliant	SNP-G16, -G20, -E30 Single output, 12 to 48V, 160, 200, 300W rated power, peak power to 400W; PC Card Construction; optional U-bracket and cover (160W, 200W models); SNP-E30 series: U-chassis and cover with cooling fan standard; Medical Grade and ITE versions; Green Power, RoHS compliant
HWS Fully enclosed; Single output; 300, 600, 1000, 1500W; Remote Programmable; Limited lifetime warranty; UL 508 approved; Small Size; Semi F47 Compliant (high line a-c); Universal input (85-265V a-c).RoHS compliant;	SWS Fully enclosed; Single output; 50, 75, 100, 150, 300, 600, 1000W; Low Cost; RoHS compliant; Power Factor Correction; Universal input (85-265V a-c); Input Transient Protection; Global Safety Approvals; Level B EMI.RoHS compliant;	RMW 300 Watts, Convection cooled d-c modular power 300 Watts, 5V, 12v, 15V, 24V, 28V, 48V and 5V plus ±12V, primary output adjustable ±10% RoHS compliant
KDN 120, 240, 480 Watts, 24V d-c, 23.5-28 Volt output adjustment range, UL 508 listed; Wide range a-c input with active PFC RoHS compliant	RTW 50, 100W, 150W 300W, 1 output, switcher, a-c to d-c converter, Input: Wide range input: 85-265V a-c/ Output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48 d-c, RoHS compliant, small footprint, PFC, FCC/VDE Class B compliance, remote on/off	JBW 10W, 15W, 30W, 50W, 75W, 100W, 150W 1 output, open frame PC board, d-c to d-c converter, Input: Wide range input: 85-265V a-c/120-370V d-c, Output: 5/12/15/24V d-c. 75W, 100W, 150W are RoHS compliant
MTW 15, 30, 60W, Wide range input: 90-264V a-c/130-370V d-c, 3 outputs: +5/±12V d-c RoHS compliant	RKE 1500W, 1 output, enclosed, a-c to d-c converter, Input: Wide range input: 85-265V a-c/ Output: 24/48 d-c, active PFC, FCC/VDE Class B compliance, wide output adjustment range, N+1 redundant operation, remote on/off RoHS compliant	RKW Open frame 30, 50, 100, 150W, 1 output, switcher, PFC (except 30W), Wide range input: 100-120V a-c/ 200-240V a-c/ output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V RoHS compliant. Availability limited to factory stock.
RKW Programmable (300, 600, 1500W) and Open Frame (30, 50, 100 and 150W), 1 output, switcher, PFC (except 30W), Wide range input: 100-120V a-c/ 200-240V a-c/ output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V RoHS compliant	ERD 30, 60, 150W, 1 output, d-c to d-c, 24/48V d-c input to 5/ 12/ 15/ 24/ 48V d-c output. Availability limited to factory stock.	FAW 15, 25, 50, 100, 150W, 1 output, switcher, 85-264V a-c/105-370V d-c wide range input, 5/ 12/ 15/ 24/ 28/ 48V output. Availability limited to factory stock.
HSM 1000, 1500W, 1 output, switcher, N+1 redundancy, PFC, Wide range a-c input, 3.3/ 5/ 12/ 15/ 24/ 28/ 48V output	PAT 20Watt, Linear, Programmable, V/C stabilizers, input: 115/230V a-c, output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c	PRM 60, 120, 180, 280, 300, 450W, Fixed outputs, ferroresonant, Voltage Stabilizers, Input: 115V a-c , Output: 5/ 8/ 12/ 15/ 21/ 24/ 26/ 28/ 36/ 48/ 60/ 120/ 240V d-c
PTR 50W, Linear, Programmable, V/C stabilizers, Separate V/C stabilization channels, input: 115/230V a-c, output: 0 to 7/ 15/ 21/ 40/ 72/ 100V d-c	RCW 350, 750, 1500W, 1 output, switcher, PFC, Wide range input: 100-120V a-c/ 200-240V a-c/ 125-370V d-c, output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V. Availability limited to factory stock.	EMR 22, 42, 54, 80W, 3/4 outputs, enclosed switcher, Input: 85-132 or 170-264V a-c, wide range 240-370V d-c, Output: +5/±12, +5/±12/24V d-c Availability limited to factory stock.
FAK 15, 25, 50W, 1 output, switcher, 115V a-c (85-132V)/110-170V d-c input, 5/ 12/ 15/ 24V output. Availability limited to factory stock.	FCP 3, 10W, 2 outputs, switcher, 115V a-c (85-132V)/110-170V d-c input, ±12/±15V output	FMP 3, 10W, 1 output, switcher, 115V a-c (85-132V)/110-170V d-c input, 5/ 12/ 15/ 24V output
RAX 50, 100, 175, 300, 1500W, 1 output, switcher,input: 85-132V a-c/170-264V a-c/ 240-370V d-c, output: 3.3/ 5/ 12/ 15/ 24/ 28/ 48V. Availability limited to factory stock.

INSTRUMENTS

MODULAR

PLUGGABLE/ HOT SWAPPABLE

PROGRAMMERS/CONTROLLERS/ INTERFACES

ACCESSORIES

SERVICE MANUALS

HSF 600W, 1200W, 1500W, 1 output, switcher hot swap, N+1 Wide range input: 95-264V a-c/125-370V d-c, 3.3/ 5/ 12/ 15/ 24/ 28/ 48V output	HSF 50W, 100W, 150W, 1 output, switcher hot swap, N+1 Wide range input: 95-264V a-c/125-370V d-c, 3.3/ 5/ 12/ 15/ 24/ 28/ 48V output	HSF-1U 50, 100W, 1U Profile, 1 output, switcher, hot swap, N+1 Wide range input: 95-264V a-c/125-370V d-c, 5/ 12/ 15/ 24/ 28/ 48V output
HSP 1000, 1500W, 1 output, switcher, hot swap N+1 redundancy, PFC, Wide range a-c input, 3.3/ 5/ 12/ 15/ 24/ 28/ 48V output	MAT 360, 720, 1080W, Programmable V/C stabilizers, IEEE 1118 Bus, Optional GPIB Adapter, input: 115/230V a-c, output: 0 to 6/ 15/ 25/ 36/ 55/ 75/ 100/ 150V d-c Built to order only!	MST 200, 400W, Programmable, Switcher. PFC, V/C stabilizer, IEEE 1118/GPIB Bus, Input: 100-240V a-c/ 24/ 28/ 48V d-c, Output: 0 to 6/ 15/ 25/ 40/ 55/ 65/ 75/ 100/ 150V d-c

INSTRUMENTS

MODULAR

PLUGGABLE/ HOT SWAPPABLE

PROGRAMMERS/CONTROLLERS/ INTERFACES

ACCESSORIES

SERVICE MANUALS

BIT 4886 Allows BOP power supply to connect to IEEE 488.2 Bus. Talk/listen support. BIT 4886 is 16-bit with resolution of 1/216. Supports SCPI/CIIL, PC Card inserted in BOP.	MBT-G Full feature MBT power supply plus Interface between IEEE 488.2 or RS 232 and Kepco Control bus (IEEE 1118). Controls up to 27 Kepco power supplies (MAT, MBT, MST, BOP, etc.). Remote control to 1000 ft. Supports SCPI/CIIL. Bench top instrument. Built to order only!	MST 488-27 Interface between IEEE 488.2 or RS 232 and Kepco Control bus (IEEE 1118). Controls up to 27 Kepco power supplies (MAT, MBT, MST, BOP, etc.), Remote control to 1000 ft. Supports SCPI/CIIL. Modular (1/9 rack width), fits RA 55/CA 400 Rack Adapter used with MST power supplies.
SN 488 Digital Programmer, 1 or 2 Channels, IEEE 488 Listener for Kepco's Programmable Models (JQE , ATE,PAT, PTR etc.), Precise 0-10V analog output Built to order only!	SNR 488 Digital Programmer, Multi-channel, IEEE 488 Listener for up to 8 Programmable Models(JQE , ATE,PAT, PTR etc.), D/A Conversion, Input: Hex or 3-bit BCD, Precise 0 to ±10V or ±1V analog output Built to order only!	SN 488-B, -D Program Boards for SNR 488 Programmer. 1 per power supply, -B for Hex input, -D for 3-bit BCD Built to order only!
TMA 4882-27 Interface between IEEE 488.2 or RS 232 and Kepco Control bus (IEEE 1118). Controls up to 27 Kepco power supplies (MAT, MBT, MST, BOP, etc.). Remote control to 1000 ft. Supports SCPI/CIIL. Bench/rack-mountable.	TMA VXI-27 Interface between VXI bus and Kepco Control bus (IEEE 1118). Controls up to 27 Kepco power supplies (MAT, MBT, MST, BOP, etc.). Remote control to 1000 ft. Supports 'plug and play,' SCPI/CIIL.

INSTRUMENTS

MODULAR

PLUGGABLE/ HOT SWAPPABLE

PROGRAMMERS/CONTROLLERS/ INTERFACES

ACCESSORIES

SERVICE MANUALS