Follow @kepco_careers
Advanced Search
Kepco Power Solutions
718-461-7000
   SERIES HSP SIGNALS AND FLAGS
Specification Rating/Description Condition
Status Flags
(Form C dry
relay contacts) (1)
POWER: Indicates low source voltage; signal asserted 5msec prior to loss of output voltage. Both NO and NC contacts available.
OUTPUT: Indicates normal operation
OVERTEMP: Overtemperature shutdown
FAN FAIL: Failure of internal fan
Status Indicators,
front panel LEDs (1)
POWER: Green Lit when a-c is sufficient.
DC FAIL: Red Lit when output failure is detected.
OVER TEMP: Yellow Lit when thermostat operates.
FAN FAIL: Red Lit when fan failure is detected.
Test Point,
Setpoint Monitor
Voltage: 0.1 x EOUT  
Current: 0 - 5V full scale
Auxiliary Voltage
(isolated)
4.5 - 5.5V d-c isolated
0 - 100 milliamperes
Present whenever housekeeping supply is operating.
(1) Status indicators and status flags are isolated and operate independently although driven by the same detector circuit.

PREVIOUS TOP NEXT

Products Support Literature Contact Us Careers About

KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 FAX (718) 767-1102
www.kepcopower.com email: hq@kepcopower.com