| Series MBT-G Bus Messages |
|
The tables below define the messages sent to the MBT-G,
or received by the BIT 4882 Card, via the IEEE 488 bus in IEEE 488
command mode and IEEE 488 data mode, respectively. These messages are
enabled during the handshake cycle, with the MBT-G operating
as either a Talker or a Listener.
|
KEPCO, INC. 131-38 SANFORD AVENUE
FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 FAX (718) 767-1102
www.kepcopower.com email: hq@kepcopower.com
©Copyright 2012, Kepco Inc. All rights reserved