|
NOTES:
|
| (1) |
Actual output voltage should be ≤0.1% of rated voltage when output voltage is set to zero.
|
| (2) |
Actual output current should be ≤0.1% of the rated current when output current is set to zero (resistive load).
|
| (3) |
Measured when output is within 10%-100% of rated value; ripple bandwidth: 300kHz (rms), noise bandwidth: <20MHz (p-p). |
| (4) |
For 6V model: measured when output voltage 2-6V at rated current; all other models measured when output 10-100% of rated voltage and rated current.
|
| (5) |
Input voltage 100-240VAC, 50/60Hz. |
| (6) |
Constant input voltage and output from 10% of loading to full load. |
| (7) |
Rated input, resistive load.
|
| (8) |
Rated power output with input 115V or 230V a-c. |
| (9) |
Specifications met after 30 minutes of operation, ambient temperature 23±5°C, humidity under 80% R. H, a-c input voltage ±5% of nominal, THD is 2%, not using the remote compensation, not operating in series or parallel. |
| (10) |
Add G suffix for models with optional GPIB interface, add E suffix for optional LAN interface.
|
| (11) |
For example, the spec for KLN 6-100 line regulation and load regulation in CV mode is 0.05% + 2.8mV
(or 6 x 0.0005) = ±3mV +2.8mV = 5.8mV, so line and load regulation are within 0.2mV to 5.8mV for 6V model.
|
