SERIES ATE
 |
TOUR
|
| MODELS |
 |
| FEATURES |
| GENERAL SPECIFICATIONS |
| STATIC SPECIFICATIONS |
| DYNAMIC SPECIFICATIONS |
|
MECHANICAL SPECIFICATIONS
|
| MANUALS |
ATE OUTLINE DIMENSIONS
FULL-RACK (1000W) - SIZE E
ATE Full Rack
NOTE: Extension brackets are available to allow for mounting in relay racks and shallow rack cabinets thet cannot accomodate the power supply depth. The brackets mount to the rail of the rack, then the mounting ears of the power supply are attached to the brackets. The power supply will protrude from the rack per dimension "D" as shown. Two brackets required per unit.
|
Fractional dimensions in light face type are in inches, dimensions in bold face type are in millimeters.
Tolerance: ± 1/64" (0.4) between mounting holes; ± 1/32" (0.8) other dimensions.
TABLE 1. SLIDE MOUNTING
| SLIDE TYPE (JONATHAN) | MOUNTING HOLES USED | |||||
| A | B | C | D | E | ||
| 110 QD-20-2 | USED | USED | NOT USED | USED | USED (SEE NOTE) | |
| 110 QD-22-2 | USED | NOT USED | USED | NOT USED | USED | |
| 110 QD-24-2 | USED | NOT USED | USED | NOT USED | USED (SEE NOTE) | |
| NOTE: ADD "E" HOLE TO SLIDES, BOTH SIDES, 0.199 DIA. HOLE, 16-1/4 IN. FROM "A" HOLE. | ||||||
