Follow @kepco_careers
Advanced Search
Kepco Power Solutions
718-461-7000
Kepco is a leader in mission critical power supplies that are ideal for applications where uptime is vital while repai/maintenace access is limited. Our hot swap, fault tolerant, redundant power supply systems are known for high reliability, capable of providing up to 99.9999% availability.

These systems run regardless of input voltage type: either d-c power (generated by wind turbine, battery or solar panels) or a-c power produced by a generator. The power supply system's input is seamless among all power sources, including a mix of DC-AC inputs resulting from changing the main leading source (e.g., input toggle between AC generator, battery input or solar panel) with no need of a transfer switch. The input is very wide range with very low brown out voltage (90-360V d-c or 80-300V a-c (30 - 1,000Hz frequency).

In addition, Kepco power supplies are ideally suited for support system applications that require accuracy, programmability and flexibility.

Offsore Wind Energy
Mission Critical
Applications

  • Control
  • Sensors
  • LIDAR
  • Communications
  • Fire Control
  • Safety Systems
  • Battery Charging


TBC Series
Telecom Grade
Battery Chargers

Programmable
250W to 3kW
TBC  Series Telecom Grade Battery Chargers (250W/3kW) Programmable

Offsore Wind Energy
Mission Critical
Products

HSF-A Series
(300W, 600W,1500W)
Hot Swap, Fault Tolerant HSF-A Power Supply 300W-1500W in rack Photo

KHX Series
Extreme Environnments
(300W -1500W),
Explosion Proof, Submersible,
Hot Swappable
KHX Series (300W -1500W), Extreme Environnments, Explosion Proof, Submersible, Hot Swappable

HSF-1UR Series
(50W -150W)
Hot Swap, Fault Tolerant
HSF-1UR Power Supply 50W-150W in rack Photo

HSP Series
(1000W - 1500W),
Hot Swap, Fault Tolerant
HSP Power Supply (1000W - 1500W) Hot Swap, Fault Tolerant in rack Photo

Offsore Wind Energy
Support Systems
Applications

  • Metrology
  • Battery Simulation and Testing
  • Motor Testing
  • Cable Testing
  • Fire Control
  • Instrument Maintenance

Offsore Wind Energy
Support Systems
Products

BOP High Power Series
(1 kW -7.5kW) Bipolar, Programmable BOP High Power Series (1 kW -7.5kW) Bipolar, Programmable

KLP Series
1.2kW Programmable
KLR Series
2.4kW Programmable
KLP/KLR Series (1.2kW/2.4kW) Programmable

EL Series
Dual Channel Electronic Loads
(1kW, 2kW) Programmable
EL Series Dual Channel Electronic Loads (1kW, 2kW) Programmable

EL Series
Single Channel Electronic Loads
(1kW - 4kW,
5kw - 25kW,
30kw - 80kW)
Programmable
EL Series Dual Channel Electronic Loads (1kW -80kW)  Programmable

Offshore Wind Turbine

Made in USA
BAA
(Buy America Act)
compliant

Using Kepco's HSP Series to Monitor a Wind Turbine System

The diagram to the right shows the Kepco HSP Series in a Wind Turbine system monitoring application, The system has the ability to monitor total performance and send performance spreadsheets to a client as a record of system performance. The AC voltage, current and frequency of the wind turbine system are monitored as well as the DC output voltage and current. This system is a non-invasive monitoring system (preferred). Typical Wind Turbine Monitoring

PREVIOUS TOP NEXT


KEPCO, INC. • 131-38 SANFORD AVENUE • FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 • FAX (718) 767-1102
www.kepcopower.com • email: hq@kepcopower.com