| BOP 2 TO 6 KILOWATT SERIES MODEL TABLE | |||||
| VOLTAGE | SYSTEM POWER | ||||
| 2KW | 3KW | 4KW | 5KW | 6KW | |
| 6V | 250A | 375A | 500A | 625A | 750A |
| 10V | 200A | 300A | 400A | 500A | 600A |
| 20V | 100A | 150A | 200A | 250A | 300A |
| 36V | 56A | 84A | 112A | 140A | 168A |
| 50V | 40A | 60A | 80A | 100A | 120A |
| 72V | 28A | 42A | 56A | 70A | 84A |
| 100V | 20A | 30A | 40A | 50A | 60A |
| 200V | 10A | N/A | 20A | N/A | 30A |
 |
 |
 |
 |
 |
|
| NOTE: |
Model numbers are constructed as follows: BOP V-AX where V = Listed Voltage A = Listed Current X = Suffix defining digital interface and front panel options: M = Models with M suffix include front panel display and keypad. G = Models with G suffix include built-in standard GPIB and RS 232 digital interfaces. E = Models with E suffix include built-in standard LXI Ethernet (LAN) and RS 232 digital interfaces. For example, a model BOP 20-150MG defines a 3kW unit, 0 to ±20V, 0 to ±150A, with GPIB and RS 232 digital interfaces. A model BOP 200-30ME defines a 6kW unit, 0 to ±200V, 0 to ±30A, with LXI Ethernet (LAN) and RS 232 digital interfaces. |
|
BOP 2 TO 6 KILOWATT SERIES MAGNET POWER SUPPLY MODEL TABLE |
||||||
| MODEL (1) | d-c OUTPUT RANGE (2) | PICTURE | ||||
|
EO MAX. (3)
(V d-c) |
IO MAX. (A d-c) |
|||||
| 2 kW | ||||||
| BOP 10-200GL or EL | 0 to ±10 | 0 to ±200 | |
|||
| BOP 20-100GL or EL | 0 to ±20 | 0 to ±100 | ||||
| BOP 36-56GL or EL | 0 to ±36 | 0 to ±56 | ||||
| BOP 50-40GL or EL | 0 to ±50 | 0 to ±40 | ||||
| 3 kW | ||||||
| BOP 10-300GL or EL | 0 to ±10 | 0 to ±300 | |
|||
| BOP 20-150GL or EL | 0 to ±20 | 0 to ±150 | ||||
| BOP 36-84GL or EL | 0 to ±36 | 0 to ±84 | ||||
| BOP 50-60GL or EL | 0 to ±50 | 0 to ±60 | ||||
| 4 kW | ||||||
| BOP 10-400GL or EL | 0 to ±10 | 0 to ±400 | |
|||
| BOP 20-200GL or EL | 0 to ±20 | 0 to ±200 | ||||
| BOP 36-112GL or EL | 0 to ±36 | 0 to ±112 | ||||
| BOP 50-80GL or EL | 0 to ±50 | 0 to ±80 | ||||
| 5 kW | ||||||
| BOP 10-500GL or EL | 0 to ±10 | 0 to ±500 | |
|||
| BOP 20-250GL or EL | 0 to ±20 | 0 to ±250 | ||||
| BOP 36-140GL or EL | 0 to ±36 | 0 to ±140 | ||||
| BOP 50-100GL or EL | 0 to ±50 | 0 to ±100 | ||||
| 6 kW | ||||||
| BOP 10-600GL or EL | 0 to ±10 | 0 to ±600 | |
|||
| BOP 20-300GL or EL | 0 to ±20 | 0 to ±300 | ||||
| BOP 36-168GL or EL | 0 to ±36 | 0 to ±168 | ||||
| BOP 50-120GL or EL | 0 to ±50 | 0 to ±120 | ||||
| (1) |
Models with GL suffix include built-in standard GPIB and RS 232 digital interfaces. Models with EL suffix include built-in standard LXI Ethernet (LAN) and RS 232 digital interfaces. |
| (2) | For other Volt-Ampere combinations, please consult factory. |
| (3) | When connecting active loads, the steady-state voltage of the active load must not exceed the maximum voltage rating of the BOP. Otherwise the overvoltage protection will shut down the power supply. |
