Clearance Requirements for Kepco Power Supplies
When the DIN rail is mounted on a flat surface, the DIN rail must be raised above the flat surface to allow power supplies longer than 6 inches to be installed/removed without interference. This restriction applies only when mounting along the short dimension (width), either horizontally (S option) or vertically (VS option). The following table lists the minimum clearances required. The table has been generated using the following formula: |
D = B x sin20° where B = (L/2)-3 and L is measured in inches
KEPCO, INC. • 131-38 SANFORD AVENUE •
FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000 • FAX (718) 767-1102
www.kepcopower.com • email: firstname.lastname@example.org